# CoolMasterNet Binding
The CoolMasterNet binding is used to control CoolMasterNet HVAC bridge devices (opens new window), using the "ASCII I/F" plaintext TCP control protocol.
# Discovery
The CoolMasterNet protocol does not support automatic discovery.
# Thing Configuration
controller
is an openHAB "bridge", and represents a single CoolMasterNet device. A single controller supports one or more HVAC units.hvac
is an HVAC device connected to a controller. Eachhvac
thing is identified by a CoolMasterNet UID (refer to CoolMasterNet controller documentation).
Example demo.things configuration for two HVAC devices connected to a CoolMasterNet device found at IP 192.168.0.100:
Bridge coolmasternet:controller:main [ host="192.168.0.100" ] {
Thing hvac a [ uid="L1.100" ]
Thing hvac b [ uid="L1.101" ]
}
# Channels
Channel | Item Type | Description |
---|---|---|
on | Switch | Turn HVAC unit on and off. |
mode | String | HVAC mode (cool, heat, auto, dry, fan). Unit may not support all modes. |
fan_speed | String | Fan speed (l, m, h, t, a ) for respectively "Low", "Medium", "High", "Top" or "Auto". Unit may not support all speeds. |
set_temp | Number | Temperature target setpoint in Celsius. |
current_temp | Number | Current temperature in Celsius at HVAC unit. |
louvre | String | Louvre angle (0, a, h, 3, 4, 6, v) for respectively "No Control", "Auto Swing", "Horizontal", "30 degrees", "45 degrees", "60 degrees" or "Vertical". Unit may not support all angles. |
# Item Configuration
Switch ACOn "Lounge AC ON/OFF" { channel="coolmasternet:hvac:main:a:on"}
String ACMode "Lounge AC Mode" { channel="coolmasternet:hvac:main:a:mode" }
Number ACTemp "Lounge Temp" { channel="coolmasternet:hvac:main:a:current_temp" }
Number ACSet "Lounge AC Set" { channel="coolmasternet:hvac:main:a:set_temp" }
String ACFan "Lounge AC Fan" { channel="coolmasternet:hvac:main:a:fan_speed" }
String ACLouvre "Lounge AC Louvre" { channel="coolmasternet:hvac:main:a:louvre_angle" }
Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)
← ComfoAir CoronaStats →